Prices incl. VAT plus shipping costs
Delivery time approx. 7-10 workdays
- Order number: IS10090.2
Two-stage full-metal wind turbine with Savonius rotor
Turbine components disassambled, generator fully assambled. Complete assembly material is included.
With double-disc generator (EGE600-VA) and universal mount.
Optional with 3-Phase rectifier or 12/24-Volt charge controller.
Protection against theft by screwing the components.
(Easily, you can choose the options beside the article images above in the variant configurator.)
Scope of supply
Generator (Aluminium, steel bearings, stainless steel axle)
Connection cable (0.3 m)
Rotor-axis (two-stage, galvanized steel)
Rotor discs (Aluminium)
Rotor blades (Aluminium)
Universal mount (two-part, Aluminium)
Assembly material (galvanized steel)
12/24-Volt charge controller (optional)
3-Phase rectifier (optional)
Technical data of the wind turbine
Total weight: 7.9 kg without cables and installation material
Total height: 107 cm
Spinning start: 0.5 - 1.0 m/s
Charging start 12.5 / 24.5 Volt: 3.0 - 4.0 / 5.0 - 6.0 m/s
Operating range: 0.5 - 30 m/s
Operating voltage: 0 - 59 Volts, optimised for 12-Volt applications
Operational noise: < Ambient noise / 30 dB max.
Dimensions of the rotor: B 40 x H 80 cm
Rotor nominal power at 12 m/s: 51 Watts
Rotor maximum power at 20 m/s: 237 Watts
Maximum generator efficiency: 96 %
Rotor type: Savonius rotor - 2 opposed C-shaped blades per level
Rotor features: Allrounder for gusty winds and all wind speeds, fast power delivery at low wind speeds, quick reaction to changing wind speeds, self-braking at high wind speeds
Mounting options: For example, with U-clamps for mast mounting, firmly srewed and/or removable on (top)/under flat surfaces; horizontal or vertical mounting possible (on walls, roof top, boat deck/mast etc.).
Important: To ensure long-lasting operation of your ALUMINUM wind turbine, always mount it in a holder at the top and at the bottom.
Generator: 1 piece
Construction: Double-disc generator (IP 54), 12-pole (24 neodymium magnets), AC 3-phase, brushless, cogging-free.
Dimensions: Height 52 mm, corpus diameter 160 mm, diameter base plate 190 mm.
Weight: ca. 3,5 kg
Housing/Socket: Weather resistant Aluminium material with stainless-steel connecting elements.
Axle: Stainless steel; equipped with precision ball bearing seatings and a axle stub with M12 external thread on top; for locking of the rotor axis equipped with a practical wrench attachment point.
Bearings: Sturdy steel ball bearings with lifetime lubrication.
Output power/voltage: 260 watts at 1200 U/min; 6.5 volts DC per 100 U/min (AC converted).
Cable connection: Strain relief below the generator bottom.
Connection cable: 0.3 meters
Specifications: Flexible and durable equipment cable with 3 phases x 1.5 mm.
Rotor axis (two-stage): 1 piece
Construction: Solid M12 threaded rod made of galvanized steel.
Rotor disc: 3 pieces
Construction: Torsion-resistant, laser-cut disc made of weather-resistant aluminum alloy.
Rotor blade: 4 pieces
Construction: Stable, laser-cut and aerodynamically shaped blade made of weather-resistant aluminum alloy.
Universal mount (two-part): 1 piece
Construction: Robust, 4 mm thick aluminum bracket with reinforcing braces. Wind turbine can be installed or replaced without uninstalling the mount. Incl. ball bearing and bushing on top.
3-Phase rectifier (optional): 1 piece
Specifications: Waterproof encapsulated 3-phase bridge rectifier for direct connection of lighting, electric motors and lead (gel) batteries. Converts the alternating current of the generator into a direct current corresponding to the rotational speed. On AC side three turbine plug connections and on DC side two plug connectors (Minus - / + Plus).
Charge controller (optional): 1 piece
Specifications: Charging mode: MPPT boost for low wind speeds; Nominal voltage (battery): 12V / 24V auto detection; Standby current consumption: 3.6 mA; Boost charge start: 8-9 V (12 V Batt.) / 15-16 V (24 V Batt.); Protection class: IP 67; Power max.: 400 Watts; Max. input voltage: 60 Volts; Brake voltage: at 14.4 V (12 V batt.) / at 28.8 V (24 V batt.); Restart voltage: at 13.5 V (12 V batt.) / at 27.0 V (24 V batt.); Float voltage (after braking mode): down to 12.5 V (12 V batt.) / down to 25.0 V (24 V batt.); Detection voltage min.: 8 V; Protection functions: Battery overvoltage, charging current limitation, braking function; Working temperature: -35 °C - +75 °C / 85 % RH; Display: Red LED (Blinking once when the battery is connected. Permanently on in braking mode. Flashes in float charge mode.), Green LED (Flashes in boost charging mode. Permanently on in standard charging mode.); Connection: 3 x blue cable (Connection to generator 3-phase alternating current), 1 x red cable (Connection to battery plus "+"), 1 x black cable (Connection to battery minus "-").
|Field of use:||Fixed installation|
|Nominal/Maximum Power:||240 Watt|
|Turbine construction:||Firrmly screwed|
|Mounting Type:||Above and below|
|Rotor Type:||Savonius rotor|
|Rotor Material:||Sea water resistant Aluminium|
|Generator Material:||Sea water restistant Aluminium|
|Assembly material:||Galvanized steel|