This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the comfort when using this website, are used for direct advertising or to facilitate interaction with other websites and social networks, are only set with your consent.

- Order number: IS10078
12/24 Volt MPPT Boost Charge Controller for Wind Turbines
Scope of Supply
Charge controller: 1 piece
Technical data of the charge controller:
Charging mode: MPPT boost for low wind speeds
Nominal voltage (battery): 12V / 24V auto detection
Standby current consumption: 3.6 mA
Boost charge start: 8-9 V (12 V Batt.) / 15-16 V (24 V Batt.)
Protection class: IP 67
Power max.: 400 Watts
Max. input voltage: 60 Volts
Brake voltage: from 14.4 V (12 V batt.) / from 28.8 V (24 V batt.)
Restart voltage: at 13.5 V (12 V batt.) / at 27.0 V (24 V batt.)
Float voltage (after braking mode): down to 12.5 V (12 V batt.) / down to 25.0 V (24 V batt.)
Detection voltage min.: 8 V
Protection functions: Battery overvoltage, charging current limitation, braking function
Display: LED
Working temperature: -35 °C - +75 °C / 85 % RH
Connection:
3 x blue cable: connection to generator (3-phase alternating current)
1 x red cable: connection to battery plus "+"
1 x black cable: connection to battery minus "-"
Display LED's:
Red LED: blinking once when the battery is connected. Permanently on in braking mode. Flashes in float charge mode.
Green LED: Flashes in boost charging mode. Permanently on in standard charging mode.