Skip to main content
Dear customers, we are on company vacation until October 20, 2024. Inquiries and orders will only be possible again afterwards. Thank you and see you soon.

ElvWiS ADVENTURE 125S Stationary Set, Double Mount

Product information "ElvWiS ADVENTURE 125S Stationary Set, Double Mount"


Two-stage Savonius turbine 125S Stationary Set, Double Mount (assembly kit)

Turbine components disassembled, generator fully assembled.
Generator, rotor axis and rotor will be firmly screwed (maintenance-free, stainless-steel assembly material is included).
Secured against theft by the firmly screwed components.

Optional with 3-phase rectifier or 12/24-Volt charge controller.
(Easily, you can choose the options beside the article images above in the variant configurator.)

Scope of supply
 
Generator (ABS, stainless steel bearings, stainless steel axle)
Turbine base plate (segmented, Aluminium)
Rotor retainer plate (Aluminium)

Connection cable (0.5 m)
Rotor-axis (Aluminium)
Rotor discs (transparent, highly resistant polymer)
Rotor blades (transparent, highly resistant polymer)
Double universal mount (Aluminium)

12/24-Volt charge controller (optional)
3-Phase rectifier (optional)
Operating and instructions manual (digital)

Technical data of the wind turbine
 

Total weight: 5.0 kg incl. mount
Total height: 65 cm

Material: Stainless steel, seawater-resistant Aluminium, UV-resistant plastics

Spinning start: 0.5 - 1.0 m/s

Charging start 12.5 / 24.5 Volt: 3.0 - 4.0 / 5.0 - 6.0 m/s

Operating voltage: 0 - 59 Volts, optimised for 12-Volt applications

Operational noise: < Ambient noise / 30 dB max.

Operating range: 0.5 - 30 m/s

Dimensions of the rotor: B 32 x H 45 cm

Rotor nominal power at 12 m/s: 23 Watts

Rotor maximum power at 20 m/s: 105 Watts
Maximum generator efficiency: 96 %

Rotor type: Savonius rotor - 2 opposed C-shaped blades per level

Rotor features: Allrounder for gusty winds and all wind speeds; fast power delivery at low wind speeds; quick reaction to changing wind speeds; self-braking at high wind speeds.

Mounting options: For example, mobile with U-clamps for mast mounting, firmly srewed and/or removable on (top)/under flat surfaces; horizontal or vertical mounting possible (on walls, caravan roof, roof top, boat deck/mast etc.).

Component details

Generator: 1 piece
Construction: Double-disc generator (IP64), 12-pole (24 neodymium magnets), AC 3-phase, brushless, cogging-free.
Housing/Socket: Extremely sturdy ABS compound material with stainless steel connecting elements.
Axle: Stainless steel; equipped with precision ball bearing seatings and a zylindrical 18 mm axis retainer with integrated centering sleeve. Bottom with a M16 internal thread; on top equipped with a metric M22 wrench attachement point and a 5 mm trough hole for fixing a shaft.
Bearings: Massive branded stainless steel ball bearings with lifetime lubrication.
Cable connection: Single implemented stable strain relief on generator.  

Turbine base plate segments: 2 pieces
Construction: 
Robust 4 mm aluminum solid sheet element. Compatible with the small universal mount. Multifunctional use provided by holes for attachment of additional securing and connecting elements.

Rotor retainer plate: 1 piece
Construction: Robust, 4 mm thick aluminum plate with precision-manufactured bearing sleeve made of impact- and abrasion-resistant polyamide. Solid branded stainless steel ball bearing with lifetime lubrication and integrated 18 mm centering sleeve. Integrated slots for the compensation of alignment tolerances.

Connection cable: 0.5 meters
Specifications: Flexible and durable 10 mm thick, rubberized outdoor equipment cable with 3 phases x 1.5 mm.  

Rotor axis: 1 piece
Construction: All Aluminium steel-made, torsion resistant 18 mm hollow axle with cross hole to fix it into the generator, locking split-pins and protective cap.  

Rotor disc: 3 pieces (125S) / 5 pieces (325S)
Construction: Rigid 2 mm thick sheet made of transparent, impact- and weather-resistant high-performance polymer. Precision machined centering sleeves made of impact- and abrasion-resistant polyamide with integrated axle locking. 

Special features: Individually paintable with Lexan colors.  

Rotor blade: 4 pieces (125S) / 8 pieces (325S)
Construction: Flexible, aerodynamically shaped blade made of transparent, impact- and weather-resistant high-performance polymer.

Special features: Individually paintable with Lexan colors. 

Universal mount (two-part): 1 piece
Construction: Robust, 4 mm thick aluminum mount with 8 mm holes for mounting on planar surfaces or for mast mounting by the use of two 40 mm U-clamps. Wind turbine can be installed or replaced without uninstalling the mount.

Charge controller (optional): 1 piece
Descripion: Waterproof encapsulated battery charge controller (12/24 V) with integrated rectifier (also suitable for LiFePo4 batteries).
Charging mode: MPPT boost for low wind speeds
Nominal voltage (battery): 12V / 24V auto detection
Standby current consumption: 3.6 mA
Boost charge start: 8-9 V (12 V Batt.) / 15-16 V (24 V Batt.)
Protection class: IP 67
Power max.: 400 Watts
Max. input voltage: 60 Volts
Brake voltage: at 14.4 V (12 V batt.) / at 28.8 V (24 V batt.)
Restart voltage: at 13.5 V (12 V batt.) / at 27.0 V (24 V batt.)
Float voltage (after braking mode): down to 12.5 V (12 V batt.) / down to 25.0 V (24 V batt.)
Detection voltage min.: 8 V
Protection functions: Battery overvoltage, charging current limitation, braking function
Working temperature: -35 °C - +75 °C / 85 % RH
Display: Unload-LED, Charge-LED
Cable connection: 3 x blue for generator alternating current, 1 x red for battery plus, 1 x black for battery minus.
Accessories: Fuse holder and fuse

3-Phase rectifier (optional): 1 piece
Description: Waterproof encapsulated 3-phase bridge rectifier for direct connection of lighting, electric motors and other direct current applications.
Function: Converts the alternating current of the generator into a direct current corresponding to the rotational speed.
Connectors: 3 x AC plug connections for generator alternating current, 2 x DC plug connections for direct current consumers (plus +/minus -)
Accessories: Fuse holder and fuse

Aplication Area: Fixed installation
Generator Material: UV-resistant plastics
Maximum Power: 100 Watt
Mounting Material: Stainless steel
Mounting Method: Above and below
Rotor Material: Transparent UV-plastics
Turbine Design: Firrmly screwed

Accessory Items

ElvWiS ADVENTURE Generator GEA-200-VA
Double-Disc Generator 225 Watts, ABS Compound Housing, stainless-steel Axis, optional with Charge Controller or Rectifier
€202.00*
Universal Mount for Economy/Stationary Turbine Base
Universal Mount (bare Aluminium), Stainless Steel U-Clamps
€36.40*
Waterproof 3-Phase Rectifier
Rectifier with open Plug Connectors
€29.00*
Waterproof 12/24-Volt Outdoor Charge Controller
Charge Controller with open Connection Cables
€49.00*

Similar Articles

ElvWiS III ALUMINIUM with Universal Mount
240 Watts 12/24 Volts - Two-stage Savonius Turbine with Disc Generator, Universal Mount, Charge Controller/Rectifier, firmly screwed
€437.70*
ElvWiS II ALUMINIUM with Universal Mount
190 Watts 12/24 Volts - Two-stage Savonius Turbine with Disc Generator, Universal Mount, Charge Controller/Rectifier, firmly screwed
€380.80*
ElvWiS I ALUMINIUM with Universal Mount
90 Watts 12/24 Volts - Two-stage Savonius Turbine with Disc Generator, Universal Mount, Charge Controller/Rectifier, firmly screwed
€314.80*
ElvWiS II ALUMINIUM Hybrid with Universal Mount
190 Watts 12/24 Volts - Two-stage Savonius Turbine with Disc Generator, Universal Mount, Charge Controller/Rectifier, firmly screwed, optional Upgrades: Ceramic Bearings and/or Reinforcement Angles on the Mount
€460.90*
ElvWiS III ALUMINIUM Hybrid with Universal Mount
240 Watts 12/24 Volts - Two-stage Savonius Turbine with Disc Generator, Universal Mount, Charge Controller/Rectifier, firmly screwed, optional Upgrades: Ceramic Bearings and/or Reinforcement Angles on the Mount
€515.00*
ElvWiS I ALUMINIUM Hybrid with Universal Mount
90 Watts 12/24 Volts - Two-stage Savonius Turbine with Disc Generator, Universal Mount, Charge Controller/Rectifier, firmly screwed, optional Upgrades: Ceramic Bearings and/or Reinforcement Angles on the Mount
€386.70*