€428.10*
Product information "ElvWiS ADVENTURE 125S Stationary Set, screwed"
Two-stage wind turbine with Savonius rotor, Stationary Set (assembly kit)
Components with exeption of the rotor ready to use.
Generator, rotor axis and rotor will be firmly screwed (maintenance-free, stainless-steel assembly material is included).
Secured against theft by the firmly screwed components.
With generator and optional with 3-phase rectifier or 12/24-Volt charge controller.
(Easily, you can choose the options beside the article images above in the variant configurator.)
Scope of supply
Generator (ABS, stainless steel bearings, stainless steel axle)
Turbine base plate (small, powder coated Aluminium)
Connection cable (0.5 m)
Rotor-axis (stainless steel)
Rotor discs (transparent, highly resistant polymer)
Rotor blades (transparent, highly resistant polymer)
12/24-Volt charge controller (optional)
3-Phase rectifier (optional)
Operating and instructions manual (digital)
Technical data of the wind turbine
Total weight: 4.9 kg without cables and installation material
Total height: 59 cm
Material: Stainless steel, seawater-resistant Aluminium, UV-resistant plastics
Spinning start: 0.5 - 1.0 m/s
Charging start 12.5 / 24.5 Volt: 3.0 - 4.0 / 5.0 - 6.0 m/s
Operating voltage: 0 - 59 Volts, optimised for 12-Volt applications
Operational noise: < Ambient noise / 30 dB max.
Operating range: 0.5 - 30 m/s
Dimensions of the rotor: B 32 x H 45 cm
Rotor nominal power at 12 m/s: 23 Watts
Rotor maximum power at 20 m/s: 105 Watts
Maximum generator efficiency: 96 %
Rotor type: Savonius rotor - 2 opposed C-shaped blades per level
Rotor features: Allrounder for gusty winds and all wind speeds; fast power delivery at low wind speeds; quick reaction to changing wind speeds; self-braking at high wind speeds.
Mounting options: For example, screwed tight on/under flat surfaces (roof top, boat deck, garden shed, etc.).
Compatibility: For example, with the universal mount for wall/mast installation or for mobile use with a big base plate and suckers/rubber tensioners on flat surfaces and with ground pegs on loose ground.
Component details
Generator: 1 piece
Construction: Double-disc generator (IP64), 12-pole (24 neodymium magnets), AC 3-phase, brushless, cogging-free.
Housing/Socket: Extremely sturdy ABS compound material with stainless steel connecting elements.
Axle: Stainless steel; equipped with precision ball bearing seatings and a zylindrical 18 mm axis retainer with integrated centering sleeve. Bottom with a M16 internal thread; on top equipped with a metric M22 wrench attachement point and a 5 mm trough hole for fixing a shaft.
Bearings: Massive branded stainless steel ball bearings with lifetime lubrication.
Cable connection: Twice implemented stable strain relief on generator and socket.
Turbine base plate (small): 1 piece
Construction: Robust 4 mm aluminum solid sheet with resistant powder coating. Compatible with the universal mount. Multifunctional use due to holes for attaching the suction feet and eyelets, as well as to the slotted holes for a fixed screw connection on flat surfaces and the direct fastening by ground pegs.
Connection cable: 0.5 meters
Specifications: Flexible and durable 10 mm thick, rubberized outdoor equipment cable with 3 phases x 1.5 mm.
Rotor axis: 1 piece
Construction: All stainless steel-made, torsion resistant 18 mm hollow axle with cross hole to fix it into the generator, locking split-pins and protective cap.
Rotor disc: 3 pieces
Construction: Rigid 2 mm thick sheet made of transparent, impact- and weather-resistant high-performance polymer. Precision machined centering sleeves made of impact- and abrasion-resistant polyamide with integrated axle locking.
Special features: Individually paintable with Lexan colors.
Rotor blade: 4 pieces
Construction: Flexible, aerodynamically shaped blade made of transparent, impact- and weather-resistant high-performance polymer.
Special features: Individually paintable with Lexan colors.
Charge controller (optional): 1 piece
Descripion: Waterproof encapsulated battery charge controller (12/24 V) with integrated rectifier (also suitable for LiFePo4 batteries).
Charging mode: MPPT boost for low wind speeds
Nominal voltage (battery): 12V / 24V auto detection
Standby current consumption: 3.6 mA
Boost charge start: 8-9 V (12 V Batt.) / 15-16 V (24 V Batt.)
Protection class: IP 67
Power max.: 400 Watts
Max. input voltage: 60 Volts
Brake voltage: at 14.4 V (12 V batt.) / at 28.8 V (24 V batt.)
Restart voltage: at 13.5 V (12 V batt.) / at 27.0 V (24 V batt.)
Float voltage (after braking mode): down to 12.5 V (12 V batt.) / down to 25.0 V (24 V batt.)
Detection voltage min.: 8 V
Protection functions: Battery overvoltage, charging current limitation, braking function
Working temperature: -35 °C - +75 °C / 85 % RH
Display: Unload-LED, Charge-LED
Cable connection: 3 x blue for generator alternating current, 1 x red for battery plus, 1 x black for battery minus.
Accessories: Fuse holder and fuse
3-Phase rectifier (optional): 1 piece
Description: Waterproof encapsulated 3-phase bridge rectifier for direct connection of lighting, electric motors and other direct current applications.
Function: Converts the alternating current of the generator into a direct current corresponding to the rotational speed.
Connectors: 3 x AC plug connections for generator alternating current, 2 x DC plug connections for direct current consumers (plus +/minus -)
Accessories: Fuse holder and fuse
Aplication Area: | Boat, Caravaning, Fixed installation |
---|---|
Generator Material: | UV-resistant plastics |
Maximum Power: | 100 Watt |
Mounting Material: | Stainless steel |
Mounting Method: | Below |
Rotor Material: | Transparent UV-plastics |
Rotors Stages: | Double-stage |
Turbine Design: | Firrmly screwed |