ElvWiS ADVENTURE Generator GEA-600-VA

Double-disc generator, stainless-steel version
With connection cable and strain relief. Optional with 12/24-Volt charge controller or 3-phase rectifier.

Technical data of the generator

Construction: Double-disc generator (IP64), 12-pole (24 neodymium magnets), AC 3-phase, brushless, cogging-free.
Housing/Socket: Extremely sturdy ABS compound material with stainless steel connecting elements.
Axle: Stainless steel; equipped with precision ball bearing seatings and a zylindrical 18 mm axis retainer with integrated centering sleeve; for locking of the rotor axis equipped with a metric M22 wrench attachement point and a 5 mm trough hole for fixing a shaft.
Bearings: Massive branded stainless steel ball bearings with lifetime lubrication.
Cable connection: Stable strain relief on the lower side of the generator. 
Connection cable: 0.5 meters of flexible and durable 10 mm thick, rubberized outdoor equipment cable with 3 phases x 1.5 mm.  
Weight: 1,75 kg
Hight: 57 mm
Diameter: 198 mm
Nominal power at 1000 U/min: 180 Watts
Maximum power at 1800 U/min: 585 Watts (short time)
Idling Voltage (AC Output): 6,5 Volt DC per 100 U/min (AC converted)

Scope of supply

Generator
Connection cable
Rectifier (optional)
Charge controller (optional)

Optional components

3-Phase rectifier (optional): 1 piece
Specifications: IP 68, waterproof encapsulated 3-phase bridge rectifier for direct connection of lighting, electric motors and lead (gel) batteries. Converts the alternating current of the generator into a direct current corresponding to the rotational speed. On generator side with 3-phase AC turbine connectors and on DC side two output connectors (+/-).   

Charge controller (optional): 1 piece
Specifications: Waterproof encapsulated battery charge regulator (12/24 V) with integrated rectifier; Charging mode: MPPT boost for low wind speeds; Nominal voltage (battery): 12V / 24V auto detection; Standby current consumption: 3.6 mA; Boost charge start: 8-9 V (12 V Batt.) / 15-16 V (24 V Batt.); Protection class: IP 67; Power max.: 400 Watts; Max. input voltage: 60 Volts; Brake voltage: at 14.4 V (12 V batt.) / at 28.8 V (24 V batt.); Restart voltage: at 13.5 V (12 V batt.) / at 27.0 V (24 V batt.); Float voltage (after braking mode): down to 12.5 V (12 V batt.) / down to 25.0 V (24 V batt.); Detection voltage min.: 8 V; Protection functions: Battery overvoltage, charging current limitation, braking function; Working temperature: -35 °C - +75 °C / 85 % RH; Display: Red LED (Blinking once when the battery is connected. Permanently on in braking mode. Flashes in float charge mode.), Green LED (Flashes in boost charging mode. Permanently on in standard charging mode.); Connection: 3 x blue cable (Connection to generator 3-phase alternating current), 1 x red cable (Connection to battery plus "+"), 1 x black cable (Connection to battery minus "-").