Dear customers, we are on company vacation until June 23rd 2024. Inquiries and orders will only be possible again afterwards. Thank you and see you soon.

ElvWiS III ALUMINIUM Hybrid with Universal Mount

Product information "ElvWiS III ALUMINIUM Hybrid with Universal Mount"

Two-stage quality wind turbine with Savonius rotor (assembly kit)

Turbine components disassembled, generator fully assembled. Complete stainless steel assembly material is included.
With double-disc generator GEA-600-VA and universal mount.
Protection against theft by screwing the components.

Optional with 3-Phase rectifier or 12/24-Volt charge controller.
Optional upgrades for particularly demanding locations: Ceramic bearings and/or reinforcement angles on the mount.
(Easily, you can choose the options beside the article images above in the variant configurator.)

This turbine is a hybrid of the ALUMINUM and ADVENTURE series, which combines their proven advantages:
- Large, solid rotor made of lightweight and durable aluminum.
- Stable and torsion-resistant stainless steel hollow axle in the rotor.
- Practical plug-in mounting of the rotor in the generator and upper bearing support.
- Effective bolt connection between rotor and rotor axis.
- Easy adjustment in the upper bearing by floating mounting.
- Massive stainless steel ball bearings in generator and mount.

Scope of supply

Generator (ABS, stainless steel bearings, stainless steel axle)
Connection cable (0.5 m)
Turbine base plate: (Aluminium, segmented)
Rotor retainer plate: (Aluminium)
Rotor-axis (stainless steel)
Rotor discs (Aluminium)
Rotor blades (Aluminium)
Universal mount (two-part, Aluminium)
Assembly material (stainless steel)
12/24-Volt charge controller (optional)
3-Phase rectifier (optional)
Ceramic bearings instead of stainless steel bearings (optional)
Reinforcement angles (4 pieces, optional)
Operating and instructions manual (digital)

Technical data of the wind turbine

Total weight: 7.5 kg without cables and installation material
Total height: 107 cm
Material: Stainless steel, seawater-resistant Aluminium, UV-resistant plastics
Spinning start: 0.5 - 1.0 m/s
Charging start 12.5 / 24.5 Volt: 3.0 - 4.0 / 5.0 - 6.0 m/s
Operating range: 0.5 - 30 m/s
Operating voltage: 0 - 59 Volts, optimised for 12-Volt applications
Operational noise: < Ambient noise / 30 dB max.
Dimensions of the rotor: B 40 x H 80 cm
Rotor nominal power at 12 m/s: 51 Watts
Rotor maximum power at 20 m/s: 237 Watts
Maximum generator efficiency: 96 %

Rotor type: Savonius rotor - 2 opposed C-shaped blades per level
Rotor features: Allrounder for gusty winds and all wind speeds, fast power delivery at low wind speeds, quick reaction to changing wind speeds, self-braking at high wind speeds
Mounting options: For example, with U-clamps for mast mounting, firmly srewed and/or removable on (top)/under flat surfaces; horizontal or vertical mounting possible (on walls, roof top, boat deck/mast etc.).

Important: To ensure long-lasting operation of your ALUMINUM wind turbine, always mount it in a holder at the top and at the bottom.

Component details

Generator: 1 piece
Construction: Double-disc generator (IP64), 12-pole (24 neodymium magnets), AC 3-phase, brushless, cogging-free.
Housing/Socket: Extremely sturdy ABS compound material with stainless steel connecting elements.
Axle: Stainless steel; equipped with precision ball bearing seatings and a zylindrical 18 mm axis retainer with integrated centering sleeve. Bottom with a M16 internal thread; on top equipped with a metric M22 wrench attachement point and a 5 mm trough hole for fixing a shaft.
Bearings: Massive branded stainless steel ball bearings (Type 6005) with lifetime lubrication.
Cable connection: Single implemented stable strain relief on generator. 

Turbine base plate segments: 2 pieces
Robust 4 mm aluminum solid sheet element. Compatible with the small universal mount. Multifunctional use provided by holes for attachment of additional securing and connecting elements.

Rotor retainer plate: 1 piece
Construction: Robust, 4 mm thick aluminum plate with precision-manufactured bearing sleeve made of impact- and abrasion-resistant polyamide. Solid branded stainless steel ball bearing (Type 6004) with lifetime lubrication and integrated 18 mm centering sleeve. Integrated slots for the compensation of alignment tolerances.

Connection cable: 0.5 meters
Specifications: Flexible and durable 10 mm thick, rubberized outdoor equipment cable with 3 phases x 1.5 mm.

Rotor axis: 1 piece
Construction: All stainless steel-made, torsion resistant 18 mm hollow axle with cross hole to fix it into the generator, locking split-pins and protective cap. 

Rotor disc: 3 pieces

Construction: Torsion-resistant, laser-cut disc made of seawater-resistant aluminum alloy.

Rotor blade: 4 pieces

Construction: Stable, laser-cut and aerodynamically shaped blade with flanged long edges made of seawater-resistant aluminum alloy.

Universal mount (two-part): 1 piece

Construction: Robust, 4 mm thick aluminum mount with 8 mm holes for mounting on planar surfaces or for mast mounting by the use of two 40 mm U-clamps. Wind turbine can be installed or replaced without uninstalling the mount.

Charge controller (optional): 1 piece
Descripion: Waterproof encapsulated battery charge controller (12/24 V) with integrated rectifier (also suitable for LiFePo4 batteries).
Charging mode: MPPT boost for low wind speeds
Nominal voltage (battery): 12V / 24V auto detection
Standby current consumption: 3.6 mA
Boost charge start: 8-9 V (12 V Batt.) / 15-16 V (24 V Batt.)
Protection class: IP 67
Power max.: 400 Watts
Max. input voltage: 60 Volts
Brake voltage: at 14.4 V (12 V batt.) / at 28.8 V (24 V batt.)
Restart voltage: at 13.5 V (12 V batt.) / at 27.0 V (24 V batt.)
Float voltage (after braking mode): down to 12.5 V (12 V batt.) / down to 25.0 V (24 V batt.)
Detection voltage min.: 8 V
Protection functions: Battery overvoltage, charging current limitation, braking function
Working temperature: -35 °C - +75 °C / 85 % RH
Display: Unload-LED, Charge-LED
Cable connection: 3 x blue for generator alternating current, 1 x red for battery plus, 1 x black for battery minus.

3-Phase rectifier (optional): 1 piece
Description: Waterproof encapsulated 3-phase bridge rectifier for direct connection of lighting, electric motors and other direct current applications.
Function: Converts the alternating current of the generator into a direct current corresponding to the rotational speed.
Connectors: 3 x AC plug connections for generator alternating current, 2 x DC plug connections for direct current consumers (plus +/minus -)

Aplication Area: Boat, Fixed installation
Generator Material: UV-resistant plastics
Maximum Power: 240 Watt
Mounting Material: Stainless steel
Mounting Method: Above and below
Rotor Material: Sea water resistant Aluminium
Rotors Stages: Double-stage
Turbine Design: Firrmly screwed

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Similar Articles

ElvWiS III ALUMINIUM with Universal Mount
240 Watts 12/24 Volts - Two-stage Savonius Turbine with Disc Generator, Universal Mount, Charge Controller/Rectifier, firmly screwed
ElvWiS II ALUMINIUM with Universal Mount
190 Watts 12/24 Volts - Two-stage Savonius Turbine with Disc Generator, Universal Mount, Charge Controller/Rectifier, firmly screwed
ElvWiS II ALUMINIUM Hybrid with Universal Mount
190 Watts 12/24 Volts - Two-stage Savonius Turbine with Disc Generator, Universal Mount, Charge Controller/Rectifier, firmly screwed, optional Upgrades: Ceramic Bearings and/or Reinforcement Angles on the Mount
ElvWiS ADVENTURE 125S Stationary Set, Double Mount
100 Watts 12/24 Volts - double-stage Savonius Turbine with Disc Generator, 0.5 m Connection Cable, Double Universal Mount, Charge Controller/Rectifier, firmly screwed, maintenance-free

Accessory Items

Waterproof 12/24-Volt Outdoor Charge Controller
Charge Controller with open Connection Cables
Waterproof 3-Phase Rectifier
Rectifier with open Plug Connectors
ElvWiS ADVENTURE Generator GEA-600-VA
Double-Disc Generator 585 Watts, ABS Compound Housing, stainless-steel Axis, optional with Charge Controller or Rectifier
From €273.40*